Intelligent Platform Management Interface
(Материал из Википедии — свободной энциклопедии)
IPMI (от англ. Intelligent Platform Management Interface) — интеллектуальный интерфейс управления платформой, предназначенный для автономного мониторинга и управления функциями, встроенными непосредственно в аппаратное и микропрограммное обеспечения серверных платформ. Ключевые характеристики IPMI — мониторинг, восстановление функций управления, журналирование и инвентаризация, которые доступны независимо от процессора, BIOS’a и операционной системы. Функции управления платформой могут быть доступны, даже если система находится в выключенном состоянии.
IPMIView 2.0
IPMIView is a GUI-based software application allowing administrators to manage multiple target systems through BMC. IPMIView V2.0 supports Supermicro’s BMCs that adheres to either IPMI v1.5 or v2.0.
IPMIView monitors and reports on the status of SuperBlade systems, including the blade server, power supply, gigabit switch, InfiniBand and CMM modules. IPMIView also supports remote KVM and Virtual Media.
IPMIView Key Features:
- IPMI System Management
- KVM Console Redirection
- Text Console Redirection (Serial-Over-LAN)
- Virtual Media Management
- IPMI User/Group Management
- Trap Receiver
- Mobile App (Android, iOS)
Operating System Requirements
- Red Hat Enterprise Linux (RHEL) 6.8 or later,
- SUSE Linux Enterprise Server (SLES) 11 or later
- Ubuntu Server 14.04 or later
- Windows 7 and 10
- Windows Server 2008 R2 SP 1, 2012 R2
(https://www.supermicro.com/SwDownload/SwSelect_Free.aspx?cat=IPMI)
IPMIUTIL
(http://ipmiutil.sourceforge.net)
IPMIUTIL performs a series of common IPMI server management functions to allow administrators to perform management functions without a learning curve. It can gather FRU inventory data, SEL firmware log, sensors, watchdog, power control, health, monitoring, and has an SOL console. It can write sensor thresholds, FRU asset tags, and supports a full IPMI configuration save/restore.
ipmiutil ver 3.15
Usage: ipmiutil [other options]
where is one of the following:
alarms show/set the front panel alarm LEDs and relays
leds show/set the front panel alarm LEDs and relays
discover discover all IPMI servers on this LAN
cmd send a specified raw IPMI command to the BMC
config list/save/restore BMC configuration parameters
dcmi get/set DCMI parameters
ekanalyzer run EKeying analyzer on FRU files (deprecated, see fru)
events decode IPMI events and display them
firewall show/set firmware firewall functions
fru show decoded FRU inventory data, write asset tag
fwum OEM firmware update manager extensions
getevt get IPMI events and display them, event daemon
getevent get IPMI events and display them, event daemon
health check and show the basic health of the IPMI BMC
hpm HPM firmware update manager extensions
lan show/set IPMI LAN parameters, users, PEF rules
picmg show/set picmg extended functions
power issue IPMI reset or power control to the system
reset issue IPMI reset or power control to the system
sel show/clear firmware System Event Log records
sensor show Sensor Data Records, readings, thresholds
serial show/set IPMI Serial & Terminal Mode parameters
sol start/stop an SOL console session
smcoem SuperMicro OEM functions
sunoem Sun OEM functions
delloem Dell OEM functions
tsol Tyan SOL console start/stop session
user list or modify IPMI LAN users
wdt show/set/reset the watchdog timer
common IPMI LAN options:
-N node Nodename or IP address of target system
-U user Username for remote node
-P/-R pswd Remote Password
-E use password from Environment IPMI_PASSWORD
-F force driver type (e.g. imb, lan2)
-J 0 use lanplus cipher suite 0: 0 thru 14, 3=default
-T 1 use auth Type: 1=MD2, 2=MD5(default), 4=Pswd
-V 2 use priVilege level: 2=user(default), 4=admin
-Y prompt for remote password
-Z set slave address of local MC
For help on each command (e.g. 'sel'), enter:
ipmiutil sel -?
ipmiutil , usage or help requested